High angle conveyor belt is a type of continuous material handling equipment. It uses special belt with corrugated sidewall and horizontal cleats. As a result, this is suitable to load and unload material horizontally or aslant or vertically. For example, bulk material, lump material, etc.. In general, it is widely applicable in various industrial applications.
Necessarily, please check why-use-corrugated-sidewall-conveyor-belt and find some of our customer cases here.
- High angle conveyor belt allows greater transport volume with increased sectional loading area. Therefore, this will enable a narrower conveyor design.
2. Moreover, it can reduce foot space. The reason is steep incline or vertical transport will be possible with pin hooks attached belt width.
3. Also there is no need for skirt board. Because high wavelike raised strips can prevent transport materials spillage.
4. Besides, incline angle can be easy to adjust with specially strong belts and press rollers.
5. Most importanyly, flat rollers may be applicable for reducing the equipment cost.
When your conveying path requires a travel going horizontal to incline or vertical, and back to horizontal. Perhaps an Unique high angle conveyor belt is the right solution for you.
We offer this unique approach. And it will prevent your material from falling back or rolling back on high inclines. Besides, it contains the material on the sides of the belt within the corrugated, flexible sidewalls. Various belt widths with numerous sidewall and cleat heights allow a large range of capacities.
Applications
Harbors, metallurgic industry, mining, electric power plants, coal industry, foundries, architecture, grain industry, cement industry, fertilizer industry, etc..
Material of Carcass
The carcass of the base belt can be EP, NN or CC fabric. You can choose freely from them according to your own requirements.
Advantages
First of all, it requires low maintenance cost.
Secondly, it has large carrying capacity. And it can effectively avoid materials from spilling.
Thirdly, the belt can convey materials from the horizontal to the inclined or vice verse freely.
Fourthly, it saves large space. Because it allows material at any angles from 0 degree to 90 degree.